Ebay 5" Cover Buyers - Specification Wizard



BeyondNice created this Wizard to simplify providing your delivery information and custom cover specifications. It will quickly walk you through the process.

The ebay item you purchased shows the size we have for the make and model, but we cannot confirm it is accurate for your specific spa.

Due to this, BE SURE TO MEASURE your spa or existing cover to confirm the specifications provided to us via this Wizard will fit your spa. This Wizard will show you how to properly measure the length, width and corners, whether rounded or angled.

Your cover will be custom manufactured to the specifications provided via this Wizard and cannot be returned if it is made to these specifications but does not fit properly.

Step 1 of 8

12%

  • Delivery

  • Fill in the name, address and contact phone number for the delivery. This information will be provided to the freight company.
  • Enter the make and model of your hot tub, and any additional information you may have such as the year manufactured.
Save and Continue Later

  • Shape, Size and Fold

  • Refer to the shape illustrations below and select the shape of your hot tub here. If none of these shapes are accurate, please contact us.

  • Measuring

    It is very important to measure your own hot tub so your cover will fit properly. If the cover that was purchased showed make, model or specifications, use those specifications ONLY to confirm your own measurements. Our years of experience prove the covers fit better when our buyers measure THEIR hot tub for THEIR cover. When in doubt, round up to insure the cover is large enough.

    You may prefer to measure the cover itself. If you like the fit of your current cover, simply measure it and we will replicate that. Your cover will be manufactured to the sizes specified here.


  • Octagon calculator To be a true octagon, A must equal B and every side must be length C.

    Help? Open a Calculator

  • Enter dimension A as shown by the shape illustration above. This is the side that will fold in half, as shown by the dashed line. Measure the maximum length, ignoring the hinge and the corners. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring your cover Measuring your hot tub
    Please enter a number less than or equal to 96.
  • Enter dimension A as shown by the shape illustration above. Measure the maximum length across the round cover, ignoring the hinge. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring your cover Measuring your hot tub
    Please enter a number less than or equal to 96.
  • Enter dimension B as shown by the shape illustration above. Measure the overall width, ignoring the corners. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring your cover Measuring your hot tub
    Please enter a number less than or equal to 96.
  • Enter dimension C, the radius of the corner, as shown by the shape illustration above. Round DOWN to make the cover corner a bit larger. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Overview Measuring tape Video guide Calculator
    Please enter a number less than or equal to 22.
  • Enter dimension C as shown by the shape illustration above. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring tape
    Please enter a number less than or equal to 40.
  • Enter dimension D as shown by the shape illustration above. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring your cover Measuring your hot tub
    Please enter a number less than or equal to 96.
  • Enter dimension E as shown by the shape illustration above. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring your cover Measuring your hot tub
    Please enter a number less than or equal to 96.
  • The fold selection made here will override the fold dashed line shown in the shape illustration example above if they conflict.
Save and Continue Later

  • Color & Look

  • See the varying patterns of Almond, Brown and Tan by clicking View below. Click any color below to see a larger color swatch.
  • How to measure
  • Split corner skirts help prevent the skirt from folding under the cover when the cover is closed, allowing for heat loss. View
  • $0.00
Save and Continue Later

  • Insulation

  • The thicker the cover, the better it will insulate. For colder climates, and when your spa is kept hot 24 x 7, additional insulation will lower your heating bills every month. View

    R-value is the measure of the insulation value of the cover. The higher the R-value the better the cover will insulate and the lower heating bills.

    Tapering Covers are thickest in the middle and slope outward like a roof
    * Tapered covers are the most common and assist with rain run off
    * Tapered covers are thickest across the fold and slope down to the sides with the handles

    Flat covers offer greater insulation but are recommended only for rain protected areas such as gazebos or under decking
    * A 6-4 tapering cover has an average thickness of 5 inches, so it has the same R-value as a 5 inch thick flat cover. However, the flat cover has NO areas where the foam is 4 inches thick so it will insulate better.
  • The thicker the cover, the better it will insulate. For colder climates, and when your spa is kept hot 24 x 7, additional insulation will lower your heating bills every month. View

    R-value is the measure of the insulation value of the cover. The higher the R-value the better the cover will insulate and the lower heating bills.

    Tapering Covers are thickest in the middle and slope outward like a roof
    * Tapered covers are the most common and assist with rain run off
    * Tapered covers are thickest across the fold and slope down to the sides with the handles

    Flat covers offer greater insulation but are recommended only for rain protected areas such as gazebos or under decking
    * A 6-4 tapering cover has an average thickness of 5 inches, so it has the same R-value as a 5 inch thick flat cover. However, the flat cover has NO areas where the foam is 4 inches thick so it will insulate better.
  • Additional insulation - For maximum insulation, select the Long Steam Stopper below to add R-9 to any cover by preventing heat loss through the fold/hinge area.
  • $0.00
Save and Continue Later

  • Strength

  • Add strength to your cover if you need to support snow, animals, etc. so the foam does not break. View
  • OPTIONAL: If necessary, specify the distance, in inches, from the nearest cover edge (ignoring the corners), to the center of the strap. View
    Please enter a number from 2 to 48.
  • $0.00
Save and Continue Later

  • Durability

  • The life of your cover can be extended a year or more with an upgraded vapor barrier. 82% of covers eventually fail from waterlogging, the cause of the cover becoming heavy. The vapor barrier is the wrap around the foam cores, inside the cover, that keeps the moisture out.
  • If the cover will be used with a cover removal system or cover lifter, this reinforcement will strengthen the cover's hinge. Prevent this!
  • $0.00
Save and Continue Later

  • Expedite

    We can expedite the MANUFACTURING time if needed. The options are below.

    Spa covers ship ground via freight carriers. Due to their size, UPS and FedEx will not accept them. Therefore, we are unable to offer rush deliveries as freight carriers do not have this option.

  • Compatibility

    1). By clicking here, I acknowledge this cover is NOT compatible with cover lifters or cover removal systems that require hardware inside the cover to accomodate the lifter fastening INTO the spa cover.

    2). By clicking here, I acknowledge this cover is not compatible and will not fit on hot tubs that have any raised features including control panels, air breathers or speakers.
  • The pandemic and now gas prices have made living up to free shipping everywhere nearly impossible. As of 4/13/22, freight has increased $50 per cover on average. While the vast majority of zip codes remain free shipping, please note we MAY NOT be able to ship free to your specific zip code. If you would like to check with us before ordering, Email Us.

    When we receive your order we will quote your specific delivery zip code, and if we cannot ship for free, we will contact you by email with a quote and give you the opportunity to cancel or proceed.

  • Authorization

    Notice: Clicking Submit below is authorization to manufacture a cover to the specifications shown above, and deliver as specified above. Covers are manufactured to industry standards of + / - one inch tolerances on length and width. Once submitted, the information above cannot be changed.
  • $0.00
Save and Continue Later
  • {all_fields}
  • Discover
    MasterCard
    Visa
    Supported Credit Cards: Discover, MasterCard, Visa
      
  • This field is for validation purposes and should be left unchanged.
Save and Continue Later