Ebay Buyers - Cover Specification Wizard

Complete this wizard to provide your specifications and customize your hot tub cover. Every cover component will be reviewed so you can design your cover to your individual needs and budget. Some components have optional upgrades available, should they fit your needs. This wizard will quickly and easily help you design the perfect spa cover for your environment and budget.

Step 1 of 8

12%
  • Delivery

  • Fill in the name, address and contact phone number for the delivery. This information will be provided to the freight company.
Save and Continue Later
  • Shape, Size and Fold

  • Refer to the shape illustrations below and select the shape of your hot tub here. If none of these shapes are accurate, please contact us.
  • Measuring

    It is very important to measure your own hot tub so your cover will fit properly. If the cover that was purchased showed make, model or specifications, use those specifications ONLY to confirm your own measurements. Our years of experience prove the covers fit better when our buyers measure THEIR hot tub for THEIR cover. When in doubt, round up to insure the cover is large enough.

    You may prefer to measure the cover itself. If you like the fit of your current cover, simply measure it and we will replicate that. Your cover will be manufactured to the sizes specified here.


  • Octagon calculator To be a true octagon, A must equal B and every side must be length C.

    Help? Open a Calculator



  • Enter dimension A as shown by the shape illustration above. This is the side that will fold in half, as shown by the dashed line. Measure the maximum length, ignoring the hinge and the corners. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring your cover Measuring your hot tub
    Please enter a number less than or equal to 96.
  • Enter dimension A as shown by the shape illustration above. Measure the maximum length across the round cover, ignoring the hinge. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring your cover Measuring your hot tub
    Please enter a number less than or equal to 96.
  • Enter dimension B as shown by the shape illustration above. Measure the overall width, ignoring the corners. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring your cover Measuring your hot tub
    Please enter a number less than or equal to 96.
  • Enter dimension C, the radius of the corner, as shown by the shape illustration above. Round DOWN to make the cover corner a bit larger. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Overview Measuring tape Video guide Calculator
    Please enter a number less than or equal to 22.
  • Enter dimension C as shown by the shape illustration above. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring tape
    Please enter a number less than or equal to 40.
  • Enter dimension D as shown by the shape illustration above. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring your cover Measuring your hot tub
    Please enter a number less than or equal to 96.
  • Enter dimension E as shown by the shape illustration above. Enter the measurement in inches and use decimals for fractions such as 80.25 for 80 1/4.

    Help? Measuring your cover Measuring your hot tub
    Please enter a number less than or equal to 96.


  • The fold selection made here will override the fold dashed line shown in the shape illustration example above if they conflict.

Save and Continue Later
  • Color & Look

  • BeyondNice leads the industry! We are the only brand to offer a marine grade vinyl with the rich look and texture of a woven fabric, as shown below. The left side of each picture is the industry standard, traditional look. To the right is the new, fabric look.

    Fab Brown - brown with rich woven fabric look and texture   Fab Gray - gray with rich woven fabric look and texture


    See the varying patterns of Almond, Brown and Tan by clicking View below. Click any camera below to see a color swatch.

  • Hidden
    See the varying patterns of Almond, Blue and Tan by clicking View below. Click any color below to see a larger color swatch.


  • How to measure



  • Split corner skirts help prevent the skirt from folding under the cover when the cover is closed, allowing for heat loss. View



  • Customize the look of your cover by selecting from the following handle styles. View



  • $0.00
Save and Continue Later
  • Insulation

  • The thicker the cover, the better it will insulate. For colder climates, and when your spa is kept hot 24 x 7, additional insulation will lower your heating bills every month. View

    R-value is the measure of the insulation value of the cover. The higher the R-value the better the cover will insulate and the lower heating bills.

    Tapering Covers are thickest in the middle and slope outward like a roof
    * Tapered covers are the most common and assist with rain run off
    * Tapered covers are thickest across the fold and slope down to the sides with the handles

    Flat covers offer greater insulation but are recommended only for rain protected areas such as gazebos or under decking
    * A 6-4 tapering cover has an average thickness of 5 inches, so it has the same R-value as a 5 inch thick flat cover. However, the flat cover has NO areas where the foam is 4 inches thick so it will insulate better.

  • The thicker the cover, the better it will insulate. For colder climates, and when your spa is kept hot 24 x 7, additional insulation will lower your heating bills every month. View

    R-value is the measure of the insulation value of the cover. The higher the R-value the better the cover will insulate and the lower heating bills.

    Tapering Covers are thickest in the middle and slope outward like a roof
    * Tapered covers are the most common and assist with rain run off
    * Tapered covers are thickest across the fold and slope down to the sides with the handles

    Flat covers offer greater insulation but are recommended only for rain protected areas such as gazebos or under decking
    * A 6-4 tapering cover has an average thickness of 5 inches, so it has the same R-value as a 5 inch thick flat cover. However, the flat cover has NO areas where the foam is 4 inches thick so it will insulate better.

  • The thicker the cover, the better it will insulate. For colder climates, and when your spa is kept hot 24 x 7, additional insulation will lower your heating bills every month. View

    R-value is the measure of the insulation value of the cover. The higher the R-value the better the cover will insulate and the lower heating bills.

    Tapering Covers are thickest in the middle and slope outward like a roof
    * Tapered covers are the most common and assist with rain run off
    * Tapered covers are thickest across the fold and slope down to the sides with the handles

    Flat covers offer greater insulation but are recommended only for rain protected areas such as gazebos or under decking
    * A 6-4 tapering cover has an average thickness of 5 inches, so it has the same R-value as a 5 inch thick flat cover. However, the flat cover has NO areas where the foam is 4 inches thick so it will insulate better.



  • Additional insulation - For maximum insulation, select the Long Steam Stopper below to add R-9 to any cover by preventing heat loss through the fold/hinge area.



  • $0.00
Save and Continue Later
  • Strength


  • Hidden
    Add strength to your cover if you need to support snow, animals, etc. so the foam does not break. View

  • TRADITIONAL: Making a stronger cover has historically been achieved exclusively by using more dense foam. This added strength correspondingly increases the weight of the cover, making it heavier to lift and move.

    INNOVATIVE: We decided to tackle this problem and invented a cover that provides extreme strength with no additional weight. Our Extreme Beam design is so innovative we were awarded a utility patent (US011008769). The increase in strength is well beyond what can be achieved with higher foam density. It even costs less!      Watch Extreme Beams support 290 pounds!



  • OPTIONAL: If necessary, specify the distance, in inches, from the nearest cover edge (ignoring the corners), to the center of the strap. View

    Please enter a number from 2 to 48.




  • $0.00
Save and Continue Later
  • Durability

  • The life of your cover can be extended a year or more with an upgraded vapor barrier. 82% of covers eventually fail from waterlogging, the cause of the cover becoming heavy. The vapor barrier is the wrap around the foam cores, inside the cover, that keeps the moisture out.



  • If the cover will be used with a cover removal system or cover lifter, this reinforcement will strengthen the cover's hinge. Prevent this!



  • $0.00
Save and Continue Later

  • Only BeyondNice allows buyers to choose the shipping method best suited for their needs. Below, select either FedEx parcel or common freight by your delivery address.

    We designed a cover to ship via FedEx parcel in order to eliminate freight damages, and to stop requiring our clients to be home for a freight delivery. It is made with our Extreme Beam Technology and is the STRONGEST and LIGHTEST cover available. It is so innovative it was awarded U.S. utility patent US011008769. Simply slide the foams in and zip shut to assemble.

         View 1 minute assembly video        View parcel vs. freight comparison        Watch 290 pound strength test


  • Only BeyondNice allows buyers to choose the shipping method best suited for their needs. Below, select either FedEx parcel or common freight by your delivery address.

    We designed a cover to ship via FedEx parcel in order to eliminate freight damages, and to stop requiring our clients to be home for a freight delivery. It is made with our Extreme Beam Technology and is the STRONGEST and LIGHTEST cover available. It is so innovative it was awarded U.S. utility patent US011008769. Simply slide the foams in and zip shut to assemble.

         View 1 minute assembly video        View parcel vs. freight comparison        Watch 290 pound strength test


  • Only BeyondNice allows buyers to choose the shipping method best suited for their needs. Below, select either FedEx parcel or common freight by your delivery address.

    We designed a cover to ship via FedEx parcel in order to eliminate freight damages, and to stop requiring our clients to be home for a freight delivery. It is made with our Extreme Beam Technology and is the STRONGEST and LIGHTEST cover available. It is so innovative it was awarded U.S. utility patent US011008769. Simply slide the foams in and zip shut to assemble.

         View 1 minute assembly video        View parcel vs. freight comparison        Watch 290 pound strength test



  • We can expedite the MANUFACTURING time if needed. The options are below.

    Spa covers ship ground via freight carriers. Due to their size, UPS and FedEx will not accept them. Therefore, we are unable to offer rush deliveries as freight carriers do not have this option.



  • 1). By clicking here, I acknowledge this cover is NOT compatible with cover lifters or cover removal systems that require hardware inside the cover to accommodate the lifter fastening INTO the spa cover.

    2). By clicking here, I acknowledge this cover is not compatible and will not fit on hot tubs that have any raised features including control panels, air breathers or speakers.

    3). By clicking here, I acknowledge this cover is not compatible with hot tubs that require the cover to be inset into the top of the hot tub.



  • Hidden
    The pandemic and now gas prices have made living up to free shipping everywhere nearly impossible. As of 4/13/22, freight has increased $50 per cover on average. While the vast majority of zip codes remain free shipping, please note we MAY NOT be able to ship free to your specific zip code. If you would like to check with us before ordering, Email Us.

    When we receive your order we will quote your specific delivery zip code, and if we cannot ship for free, we will contact you by email with a quote and give you the opportunity to cancel or proceed.
  • Notice: Clicking Submit below is authorization to manufacture a cover to the specifications shown above, and deliver as specified above. Covers are manufactured to industry standards of + / - one inch tolerances on length and width. Once submitted, the information above cannot be changed.



  • $0.00
Save and Continue Later
  • {all_fields}
  • Discover
    MasterCard
    Visa
    Supported Credit Cards: Discover, MasterCard, Visa
     
  • This field is for validation purposes and should be left unchanged.
Save and Continue Later